Aipu YZ series submersible slurry pump can be used as feeding pump
for shale shaker in HDD mud solids control system. Also can be used
as centrifuge in drilling mud solids control system for oil and gas
drilling, and so on
Usually, the slurry pump are vertical submersible type. We transfer drilling mud from mud
tank or pit to equipment. Such type slurry pump can be said free
maintence pump. The bearing is over liquid level and the material
is rather anti-abrasive
The submersible slurry pump consisting impeller, pump case, pump
shaft, bearing, driven power, supporting frame, coupler, shaft
sleeve, shaft seal, and so on. Usually, we use the electrical motor
drive pump. The popular pump flow rate is from 30m³/h to 200m³/h.
Actually, the pump is a type of Centrifugal Pump. As submersible slurry pump is mainly transferring liquid and
solid mixture, the pump raw material is rather anti-abrasive. It
can transfer different hard materials. Including sand, cement,
particles, shale, and so on
YZ series Submersible Slurry Pump Technical Parameters
| Model | Flow Rate | Head(m) | Speed(RPM) | Efficiency(%) | Power(kw) |
| m³/h | L/s |
| AP50YZ20-18 | 20 | 5.6 | 18 | 1430 | 42 | 3 |
| AP50YZ25-12 | 30 | 8.3 | 11 | 1430 | 38.2 | 3 |
| AP50YZ50-20 | 40 | 11 | 22 | 1440 | 41 | 7.5 |
| AP65YZ50-12 | 50 | 13.8 | 12 | 1440 | 55.9 | 5.5 |
| AP80YZ80-20 | 80 | 22.2 | 21 | 1460 | 55 | 11 |
| AP80YZ80-20A | 90 | 25 | 15.6 | 1460 | 51 | 11 |
| AP100YZ100-30A | 110 | 30.6 | 24 | 1470 | 54 | 18.5 |
| AP100YZ100-30 | 120 | 33.3 | 28 | 1470 | 56 | 22 |
| AP100YZ160-38 | 160 | 44.4 | 39 | 1480 | 52 | 45 |
| AP150YZ250-40B | 200 | 55.6 | 25 | 1480 | 49 | 37 |
| AP150YZ250-40A | 240 | 66.7 | 31 | 1480 | 50 | 45 |
| AP150YZ280-20 | 320 | 88.9 | 17 | 980 | 57 | 37 |
